国内外割心钻具研发概况与分析          下载免费PDF全文

李鑫淼  梁健  尹浩  王志刚  梁楠 《探矿工程》2020,47(7):47-55

在松散、松软、破碎等复杂地层钻进时，与常规取心技术相比，割心技术能够获得更高的岩心采取率。国内外研发的割心钻具主要包括双动双管、单动双管和绳索取心割心钻具3种，钻具研发的关键点主要包括岩心爪结构设计和加压方式选择。从钻具研发情况看，三角形岩心爪具有良好的闭合性能，液力加压能够实现对割心压力的准确控制，绳索取心割心钻具钻进效率较高，但研发难度相对较大。本文详述了国内外割心钻具的结构设计特点及取心操作流程，分析了钻具设计原理的优缺点，提出了割心钻具发展趋势，为割心钻具的优化设计奠定了基础。  相似文献   

延迟交联凝胶研制及其在广西某铀矿堵漏应用          下载免费PDF全文

熊正强  陶士先  刘俊辉  李晓东  薛倩冰 《探矿工程》2020,47(4):140-144

针对地质钻探小井眼条件下失返性漏失堵漏技术难题，开展了适用于地质钻探堵漏要求的聚合物交联凝胶研究。采用单因素优选法，优选了交联凝胶体系用各种处理剂，并以环保型植物胶GJ为成胶剂，加入交联控制剂N1及交联剂1号等组分，研制了一种延迟交联凝胶。该凝胶在广西某铀矿勘查ZK6-37-1孔堵漏成功应用，解决了2个孔段失返性漏失问题。研究结果表明，该凝胶具有交联时间可控(交联时间10～75 min)以及较高的凝胶强度（承压≥6 MPa），在解决失返性漏失方面具有广阔的应用前景。  相似文献   

Micromechanical approach to effective viscoelastic properties of micro‐fractured geomaterials          下载免费PDF全文

Cássio B. Aguiar  Samir Maghous 《国际地质力学数值与分析法杂志》2018,42(16):2018-2046

The aim of this paper is to formulate a micromechanics‐based approach to non‐aging viscoelastic behavior of materials with randomly distributed micro‐fractures. Unlike cracks, fractures are discontinuities that are able to transfer stresses and can therefore be regarded from a mechanical viewpoint as interfaces endowed with a specific behavior under normal and shear loading. Making use of the elastic‐viscoelastic correspondence principle together with a Mori‐Tanka homogenization scheme, the effective viscoelastic behavior is assessed from properties of the material constituents and damage parameters related to density and size of fractures. It is notably shown that the homogenized behavior thus formulated can be described in most cases by means of a generalized Maxwell rheological model. For practical implementation in structural analyses, an approximate model for the isotropic homogenized fractured medium is formulated within the class of Burger models. Although the approximation is basically developed for short‐term and long‐term behaviors, numerical applications indicate that the approximate Burger model accurately reproduce the homogenized viscoelastic behavior also in the transient conditions.  相似文献   

Solution for a plane strain rough‐walled hydraulic fracture driven by turbulent fluid through impermeable rock          下载免费PDF全文

N. Zolfaghari  E. Dontsov  A. P. Bunger 《国际地质力学数值与分析法杂志》2018,42(4):587-617

The impact of turbulent flow on plane strain fluid‐driven crack propagation is an important but still poorly understood consideration in hydraulic fracture modeling. The changes that hydraulic fracturing has experienced over the past decade, especially in the area of fracturing fluids, have played a major role in the transition of the typical fluid regime from laminar to turbulent flow. Motivated by the increasing preponderance of high‐rate, water‐driven hydraulic fractures with high Reynolds number, we present a semianalytical solution for the propagation of a plane strain hydraulic fracture driven by a turbulent fluid in an impermeable formation. The formulation uses a power law relationship between the Darcy‐Weisbach friction factor and the scale of the fracture roughness, where one specific manifestation of this generalized friction factor is the classical Gauckler‐Manning‐Strickler approximation for turbulent flow in a rough‐walled channel. Conservation of mass, elasticity, and crack propagation are also solved simultaneously. We obtain a semianalytical solution using an orthogonal polynomial series. An approximate closed‐form solution is enabled by a choice of orthogonal polynomials embedding the near‐tip asymptotic behavior and thus giving very rapid convergence; a precise solution is obtained with 2 terms of the series. By comparison with numerical simulations, we show that the transition region between the laminar and turbulent regimes can be relatively small so that full solutions can often be well approximated by either a fully laminar or fully turbulent solution.  相似文献   

土体约束对海底管道整体屈曲的影响机理研究     

李成凤  刘润  彭碧瑶  王秀妍 《海洋科学》2018,42(2):56-63

高温高压下海底管道的整体屈曲稳定性分析是管道设计的重要组成部分,而选取多长的管道进行分析对其整体屈曲稳定性结果影响显著。依据临界管长将管道分为"长管"与"短管",基于动力显式分析方法,揭示了长管与短管在发生整体屈曲过程中,屈曲幅值与波长、管壁轴向压力、轴向应变及轴向位移的变化规律;研究了土体约束力影响管道临界长度的规律性,分析了土体约束力系数对长管与短管整体屈曲变形的影响。研究发现,土体约束力对短管的整体屈曲行为影响显著,短管的整体屈曲幅值随土体约束力系数的增大呈现先增大后减小的趋势。该项研究对区分不同长度管道的整体屈曲类型进而采取有效防控措施具有重要参考价值。  相似文献   

Effects of the geometry of two‐dimensional fractures on their hydraulic aperture and on the validity of the local cubic law          下载免费PDF全文

Ahmad Hajjar  Luc Scholtès  Constantin Oltéan  Michel Antoine Buès 《水文研究》2018,32(16):2510-2525

Flow through rough fractures is investigated numerically in order to assess the validity of the local cubic law for different fracture geometries. Two‐dimensional channels with sinusoidal walls having different geometrical properties defined by the aperture, the amplitude, and the wavelength of the walls' corrugations, the corrugations asymmetry, and the phase shift between the two walls are considered to represent different fracture geometries. First, it is analytically shown that the hydraulic aperture clearly deviates from the mean aperture when the walls' roughness, the phase shift, and/or the asymmetry between the fracture walls are relatively high. The continuity and the Navier–Stokes equations are then solved by means of the finite element method and the numerical solutions compared to the theoretical predictions of the local cubic law. Reynolds numbers ranging from 0.066 to 66.66 are investigated so as to focus more particularly on the effect of flow inertial effects on the validity of the local cubic law. For low Reynolds number, typically less than 15, the local cubic law properly describes the fracture flow, especially when the fracture walls have small corrugation amplitudes. For Reynolds numbers higher than 15, the local cubic law is valid under the conditions that the fracture presents a low aspect ratio, small corrugation amplitudes, and a moderate phase lag between its walls.  相似文献   

辽宁瓦房店金刚石矿床50号岩管地质特征及找矿预测     

刘礼广  吴大天 《中国地质调查》2020,7(5):33-41

以辽宁瓦房店金刚石矿床50号岩管为例,系统分析了该矿床的地质特征。通过对斑状富金云母金伯利岩、含围岩角砾斑状金伯利岩和金伯利凝灰角砾岩进行岩石地球化学分析发现: 碳酸盐化金伯利凝灰角砾岩超基性成分较少,滑石化、蛇纹石化及碳酸盐化混合金伯利凝灰角砾岩超基性成分较多; 铬、镍、钛在金伯利凝灰角砾岩中的含量较低,在含围岩角砾斑状金云母金伯利岩中的含量略高,在斑状富金云母金伯利岩和斑状金伯利岩中的含量最高。该矿床主要为含围岩角砾斑状金伯利岩和斑状富金云母金伯利岩,其次为金伯利凝灰角砾岩、含围岩角砾斑状金云母金伯利岩和含金伯利物质角砾岩。含铬镁铝榴石、铬铁矿和碳硅石是金刚石的伴生矿物。水平方向上,金伯利岩含矿品位西部较富,东部较贫; 垂直方向上,金伯利岩含矿品位变化较小。通过三维建模,推测50号岩管不是根部相,而是受EW向推覆构造作用影响发生的断层错位,在其东侧600 m深处存在50-1号金伯利岩体。  相似文献   

5 000 m深部干热岩钻井方案的技术经济评价   总被引：1，自引：1，他引：0       下载免费PDF全文

赵远刚 《中国地质调查》2018,5(2):73-77

介绍了美国芬顿山和法国苏茨深部干热岩的典型钻井技术方案,并根据我国干热岩钻井基础和地质成藏条件,从钻井深度、井身结构、钻进工艺和钻机设备等方面制定了3种不同的干热岩钻井技术方案,给出了具体技术指标数值。通过计算,对每种方案进行了技术经济评价,结果认为: 大直径钻井方案是技术可靠、经济可行的5 000 m干热岩钻探施工方案。  相似文献   

Main technical innovations of Songke Well No.2 Drilling Project     

《China Geology》2018,1(2):187-201

Songke Well No.2, one of the main part of the scientific drilling project in Songliao Basin, which was drilled 7018 m and acquired the part of cores continuously from the Low Cretaceous to the Carboniferous and the Permian from the 2843 m deep, can be considered as the deepest continental drilling project in Asia. Aiming at the features of longer well sections, larger diameters and multiple spud-ins for coring of Songke Well No.2, this project broke through the “coring in small diameter and reaming in large diameter” spud-in drilling-completion procedures which are always used in large-diameter-well coring for continental scientific drilling projects in domestic and overseas and the drilling method of short-single-cylinder roundtrip footage. At the same time, “coring in the same diameter and completing drilling at one single diameter” was achieved at all φ311 mm and φ216 mm coring sections of more than one thousand meters long, high-efficient operation with “drilling long footage with drill tools combined in multi-cylinders” was achieved at deep coring section. Four world drilling records were created which include more than a thousand meters continuous coring at φ311 mm, and the footage per roundtrip footage at φ311 mm, φ216 mm and φ152 mm is all more than 30 m, all of these breakthroughs reduced at least 300 days for this project; moreover, considering the characteristics of formations that the geothermal gradient is high in the drilled sections and the inside-well temperature is over 240°C after drilling completion, a formate-polymer water-based mud system was developed by compounding attapulgite and sodium bentonite and by adding independently developed high-temperature stabilizer, which can provide critical technical support for successful well completion at 7018 m in the super-high-temperature environment It is the first time that the water-based mud is operated at the working temperature higher than 240°C in China; Besides, considering the high-quality requirement on cores imposed by the project, the method “mechanical cored is charge” to discharge core nondestructively on the ground was worked out, and more than 4000 m scatheless cores were discharged out of the drill pipes while maintaining original stratum structures.  相似文献   

四川平武银厂金矿勘探复杂地层钻进技术          下载免费PDF全文

杨福全  龙海涛 《探矿工程》2018,45(6):36-39

四川平武银厂金矿区钻探施工中遇到漏失、缩径、岩心破碎、易孔斜和钻孔事故频发等施工难题,施工难度极大。本文结合地层特点,通过采用绳索取心液动锤、高密度低失水泥浆体系、跟管钻进等工艺技术措施,提高了钻进效率和施工质量,大幅度减少了孔内事故的发生,为顺利完成钻孔施工任务奠定了坚实的基础。  相似文献